Flame Stop’s Flame Stop II
Flame Stop II is a water-based, post-treatment, interior/exterior fire retardant and wood preservative that penetrates the material and bonds with the cellular structure. The penetrant protects the substrate by developing a self-extinguishing reaction when the treated material comes in contact with an open flame. When properly applied on certain untreated woods such as Douglas Fir, the wood shall have a Class A rating. Flame Stop II contains polymers that maintain the fire retardation for up to five years for exterior applications. Flame Stop II is non-toxic, non-combustible, non-carcinogenic, easy to apply, and contains no PDBE’s.
Flame Control’s Flame Control No. 10-10
Class “A” rated, interior fire retardant paint. Mineral spirits reducible. It dries to a flat finish and is primarily designed for use on combustible substrates. Can be overcoated with Flame Control No. 40/40A low or semi-gloss finish or No. 30-30 semi-gloss. No. 10-10 is also available in a low-VOC version (10-10A).
Flame Control’s Flame Control No. 20-20A
Class “A” rated, interior latex fire retardant paint. Water-reducible. It dries to a flat finish and is designed primarily for use on combustible substrates. Can be overcoated with Flame Control No. 40-40A to obtain a low or semi-gloss finish.
Flame Control’s Flame Control No. 30-30
Class “A” rated, fire retardant enamel is a non-yellowing interior semi-gloss paint, which is recommended for use as an overcoat in areas where maximum cleansibility, durability, and fire retardancy is required. Flame Control No. 30-30 was designed as an overcoat for Flame Control No. 10-10 or it can be used as a fire resistant coating by itself on all non-combustible surfaces, where a Class “A” finish must be maintained. When applied over Flame Control No. 10-10, the durability of the coating is greatly improved.
Flame Control’s Flame Control No. 40-40A
Class “A” rated, water-reducible low gloss or semi-gloss latex fire resistant paint, designed for use on all non-combustible surfaces, i.e. plaster, drywall, concrete, block, brick, etc. Also rated as a Class “A” overcoat for Flame Control Flat Fire Retardant Paints. Dries in approximately 2 hours, and yields a highly scrubbable/cleansible finish.