Polyurethanes & Acrylics

Accessa carries some of the best regular polyurethane and acrylic polyurethane products on the market today. These coatings are two-component products that provide excellent coating properties with proven quality and performance. Many of these products are high solids, high-build, while having a viscosity similar to lacquers and varnishes, and many can be built-up to 8-12 dry mils of finished coating thickness.  Others can achieve that sought-after tight, close-to-the-grain look with the protection and clarity that only an acrylic polyurethane can provide.

Polyurethanes and acrylics meet the American Woodworking Institutes Finish System Guide at a level of TR-6. This means these coatings have superior stain, heat, moisture, and solvent-resistance when compared to traditional products used in North America. These coatings contain no formaldehyde and will allow for LEED points under the Indoor Air Quality Section of this US Green Building Standard. Polyurethanes and acrylics offer outstanding clarity and provide for diverse aesthetics (wet, glossy look to open pore and low sheens). These coatings can be applied with standard equipment used in the typical woodworking shop and are suitable for use on a wide-range of products including cabinets, doors, residential and office furniture.

Features of polyurethane coatings:

• Easy to use; any conventional spray method, as well as roller or curtain coater
• Superb scratch, mar, and chemical resistance
• Full-fill without fear of checking or cracking
• Almost no shrink-back when compared to conventional systems
• Excellent clarity
• High solids (42-65%).
• HAPs compliant
• Clear, tinted and solid colors available
• Versatility
• Flexibility
• Completely formaldehyde-free, extremely low DIS levels
• Can be sprayed electrostatically

Some of the top polyurethane products we inventory and sell currently:
ICA’s FP272
The FP272 is a clear high-build polyurethane sanding sealer.  ICA’s FP272 is UL GREENGUARD® certified.
ICA’s FP281EC
Universal white base coat.
ICA’s FP285
The FP285 is a high-build white base coat for MDF.  ICA’s FP285 is UL GREENGUARD® certified.
ICA’s FP285N 
High-build black base coat.
ICA’s OP263
The OP263 is an economical, self-sealable, clear polyurethane topcoat.
ICA’s OP383 Series
The OP383 is a clear polyurethane topcoat.  ICA’s OP383 is UL GREENGUARD® certified.
ICA’s OP446G Series
Extra durable clear polyurethane topcoat.
ICA’s LP157
The LP157 is a clear polyurethane for exterior products.  ICA’s LP157 is UL GREENGUARD® certified.
ICA’s OP430 
The OP430 is an economical, self-sealable, opaque (white) polyurethane topcoat.
ICA’s OP400 Series
The OP400 is a high solids opaque polyurethane topcoat.  ICA’s OP400 is UL GREENGUARD® certified.
ICA’s S-Matt OPX300
ICA’s S-Matt OPX300 polyurethane topcoat for interior furnishings was designed to create high-performance, ultra-matt surfaces.  In particular, ICA’s S-Matt OPX300 transparent polyurethane topcoat achieves an anti-glare, highly soft-touch surface, and self-healing properites.

Features of acrylic polyurethanes:
Acrylic polyurethane systems are a two-component system which are effectively non-yellowing. These products have good physical and chemical strength and excellent abrasion resistance. Acrylic polyurethanes offer a good pot life and excellent adhesion.

Some of the top acrylic products Accessa represents are:
ICA’s FAC241 – Clear acrylic basecoat.  Great clarity, build, and sandability.
ICA’s OAC929 – an economical, ready-to-spray, clear acrylic polyurethane topcoat.  Can be used self-seal, or over the FAC241.  Provides exceptional clarity, chemical and scratch resistance with the added benefit of ease of use.
ICA’s OAC363 – A very high-quality acrylic polyurethane topcoat.
ICA’s OAC306G2 – ICA’s OAC306G2 is a matte acrylic polyurethane topcoat formulated for coating cabinetry, furniture, and other fittings for interior use.  The OAC306G2 has outstanding anti-yellowing properties, outstanding matte gloss uniformity, and good drying quickness.
ICA’s FAC240B – ICA’s FAC240B is an opaque acrylic base-coat developed for coating wood such as oak or ash for an open pore finish.  The product can be also used for outdoors, in particular when insulating capacity towards tannins is required.
ICA’s OAC700B Opaque Acrylic Topcoat – ICA’s OAC700B is a white acrylic sandable topcoat, developed for coating wood such as oak or ash with open pore finish. Its main characteristics are good wetting of the base and uniform penetration into the pores of the wood. Excellent covering. Good surface
hardness and uniformity.